Skoda Elroq – Cabin Filter Replacement (Instructions)
Regular filter replacement keeps the air in your Skoda Elroq clean, ensures the air conditioning works efficiently, and prevents your windows from fogging up. This guide explains how to easily replace it yourself in just a few minutes.
Quick Check
| Time required | approx. 5 minutes |
| Difficulty | Easy |
| Installation location | Frunk / engine compartment |
| Tools | No tools required |
| Compatible filter | EDOC-1009-S |
| Airflow | downward (toward the vehicle floor) |
| Manufacturer's interval | every 30,000 km or 24 months |
| EV-DOC recommendation | every 15,000-20,000 km or 12-18 months |
Preparation
- Vehicle safety: Make sure the vehicle is secured in Park (P), completely deactivated (ignition/system off), and that the ventilation/air conditioning is switched off.
- Protection & hygiene: Place a mat or cloth under the work area to catch falling dirt. Safety glasses and a respirator protect you from falling dust and pollen. It is best to have a vacuum cleaner ready to vacuum out the housing before installation.
- Lighting: As the installation location is usually dark, we recommend using a headlamp or flashlight for the best possible visibility.
- Tools: No tools are required for the replacement.
- Access: The filter is located in the engine compartment on the passenger side, in front of the Windscreen. Fully open your vehicle's front hood to ensure clear access.
Step-by-step guide
-
Open front hood & locate housing
Open your vehicle's front hood. The filter housing is at the very back of the engine compartment on the passenger side, directly in front of the Windscreen. -
Open filter housing cover
Gently squeeze or push upward the retaining tabs on the sides of the horizontal housing cover to unlock and remove the cover. -
Remove old filter
Pull the old cabin air filter upward out of the compartment. Make sure no leaves or dirt particles fall into the exposed ventilation duct. -
Insert new filter
Carefully slide the new cabin air filter into the compartment, ensuring a proper fit.↔ Airflow: The arrows on the side of the filter must point down (toward the vehicle floor)!
💡 Pro tip: Briefly vacuum coarse dirt and leaves from the upper edge of the housing before inserting the new filter!
-
Close housing & lock front hood
Put the housing cover back on and press it firmly until the retaining tabs audibly and noticeably click into place. Then close the front hood.

